AXIAL Yeti JR Rock Racer 1/18 4WD RTR

Product Code: AX90054

Out of stock

$289.99
 

Note: You may pre-order this item and it will ship when it arrives in stock.

Notify me when this product is back in stock

Free shipping

on products over $99*

Description

Details

With the introduction of the Yeti line back in 2014, the bar was set. Axial introduced a vehicle that featured independent front suspension(IFS) with a floating solid rear axle, something commonly reserved only for the full size off-road realm. This time around, the decision was made to make things a wee bit smaller, while still providing a high level of performance. Enter, Yeti Jr. Rock Racer 1/18th Scale Electric 4WD - RTR.


Features


AR18 SOLID REAR AXLE
To help keep the scale premise in check, simply shrinking down an existing axle was just not an option. In keeping the proportions correct along with yielding ample terrain clearance a new axle was designed, the AR18. Features include a compact two-piece design, captured pinion gear, and three-linked rear suspension with integrated sway-bar like support design for improved handling.

Rear suspension features:

  • 8mm axle with 12mm hex adapter
  • Open diff
  • 61mm-90mm 7mm diameter shocks with 3mm shocks shafts
  • Multiple shock mounting positions

  • ADJUSTABLE COILOVER SHOCKS
    The threaded shock bodies hold a single coilover spring. They are oil filled and allow you to tune the dampening rate.

  • 61mm-90mm 7mm diameter shocks
  • 3mm shock shafts
  • INDEPENDENT FRONT SUSPENSION
    The Yeti™ Jr. is equipped with an Independent Front Suspension (IFS) system to help maintain high-speed stability when running through a diverse range of terrain. The IFS system allows you to better control the intended direction of travel at high speeds when one side is adjusting to overcome road obstructions. This stability that the IFS front end provides is paramount when rock racing.

    Front suspension features:
  • Machined aluminum CVD’s
  • 8mm axle with 12mm hex adapter
  • Open diff
  • 2.50mm hingepins
  • 45mm-62mm 7mm diameter shocks with 3mm shocks shafts
  • Multiple shock mounting positions

  • EASY CHASSIS ACCESS
    Pull two pins and pop the hood for complete access to chassis components.

    CENTERED REAR DRIVESHAFT
    The rear driveshaft is centered for efficiency, and is mated to the rear differential outdrive which is captured by a bearing to keep things running smoothly.

    FULL BALL BEARINGS
    Just because the Yeti Jr. is smaller in size doesn’t mean the features need to follow suit. No bushings found here, instead the Yeti Jr. drivetrain is freely spinning on sealed cartridge bearings throughout the entire vehicle.

    1.55 METHOD BEADLOCK STYLE WHEELS
    Based off the popular Method 105 machined wheels, these officially licensed wheels are dressed in an aggressive all black style and they feature a standard sized 12mm hex for a strong, durable fit.

    DIFFERENTIAL OUTPUTS AND CENTER DRIVE SHAFT COUPLER
    Made of a genuine DuPont™ material for strength and durability.

    TACTIC RE20 ESC/RECIEVER COMBO - AUTO-BIND EQUIPPED, WATERPROOF
    The Tactic RE20 2.4GHz receiver/ESC is an all-in-one waterproof unit that uses no crystals and features an internal antenna, so you'll experience worry free driving without frequency conflicts or antenna damage. This lightweight, compact, auto-bind equipped receiver/ESC with LED indicator makes setup easy! It’s also 2S LiPo capable with voltage cut-off and features an adjustable drag brake.

    TACTIC TSX106 SERVO, WATER RESISTANT
    The included water resistant Tactic TSX106 metal gear servo is rated at 26.5oz-in of torque for strong turning power.

    TACTIC TSX106 SERVO, WATER RESISTANT
    The included water resistant Tactic TSX106 metal gear servo is rated at 26.5oz-in of torque for strong turning power.
    v 48P GEARS
    No micro gearing here, instead the drivetrain features 48P gears, which is not only a robust design but also expands the number of possible gearing configurations. The spur gear is mated to a 10T metal pinion gear for optimal gearing.

    40T BRUSHED ELECTRIC MOTOR, WATER RESISTANT
    Delivering an even balance of speed and technical adventuring, the 380 40T motor features a worry-free design with enlarged cooling ports for extended periods of use. Easy operation: no tuning, no fuel, and no loud exhaust noise. Just plug ‘n’ go!

    ADJUSTABLE MOTOR MOUNT
    Adjusting gear mesh to accommodate different sized pinion or spurs gears has never been easier with the help of a cam style motor mount design. The front top plate secures the cam motor plate in place and all screws thread down into the chassis, eliminating the need for extra long hex drivers in order to secure the motor and gear mesh.

    ADJUSTABLE BATTERY TRAY
    The battery tray is fully length and height adjustable with multiple configurations available. It’s easily changeable between 6-cell NiMH battery packs or smaller sized 2S LiPo battery packs. The integrated battery tray can be easily accessed without having to remove any body clips or even the body, allowing for quick battery swaps.

    REQUIRED ITEMS
    Ready-to-run complete. Everything you need is included!



    Reviews

    Be the first to review this product

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    Can we Suggest