Hobbywing 30302360 SeaKing 120amp V3 ESC

• Brushed/Brushless: BL
• Waterproof: Yes
• Cont./Peak Current: 120A/720A
• Input: 2-6S LiPo, 6-18 Cells NiMH
• BEC Output: Linear Mode:6V/5A
• Wires & Connectors
• Input Wires: 12AWG 200mm
• Output Wires: 12AWG 150mm
• Input Connectors: No
• Output Connectors: No

(Note: All the wire length above is the original length not the length you see from the outside.)

ESC Programing via

• Transmitter: Supported
• LED Program Box: Supported
• LCD Program Box: Not Supported
• WiFi Module: Not Supported
• Program Port: Separate Program Port

Size & Weight

• Size: 68.5 x 39.4 x 32mm
• I.D./O.D. of the Water Cooling Pipe: 3.0/5.4 mm
• Weight: 150g

Applications

• Boat Length <110cm

Installation & Connection

Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.)

For safety, please always keep the propeller away from human body or any other objects.

Red color input wire is positive pole, Black color input wire is negative pole.

Download Product Manual