Home Arrows Hobby 64mm Marlin PNP RC Aircraft AH009P
Show sidebar

Arrows Hobby 64mm Marlin PNP RC Aircraft AH009P

Product Code: AH009P
Barcode: AH009P
$299.99
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

We Also Recommend...

Arrows Marlin 64mm EDF PNP

The Arrows Marlin 64mm EDF is equipped with a 3150kV motor combined with a 40A ESC, and a powerful 64mm 11 blade EDF, ensure plenty of power for takeoff and maneuvers. The fan sounds like a real turbine.

This plane has a more robust fixed landing gear than most, to handle bumpy landings. More importantly it is the only plane in its class to have flaps to shorten takeoff, and to make approaches and landings more like those of a high wing trainer. 

This plane basically has eight screws and some servo connections to complete assembly. No glue is necessary, and because we use 8 servos we are not running a lot of control rods around. Even the nose wheel has it's own servo. Flap and aileron connections are made with ball linkages, for greater strength at higher speeds. A latch type canopy makes in flight canopy loss a thing of the past.

The Arrows Marlin 64mm EDF is an ALL NEW design with the beginner to intermediate pilot in mind. If you are looking for a first EDF to try, this plane is for you.

Features

  • Sleek aerodynamic airframe
  • Screw together assembly
  • Flaps
  • Ball linkages
  • Latch type canopy
  • Ultra durable EPO foam
  • The perfect beginner jet!

Content

  • Arrows Marlin 64mm EDF JET PNP
  • EDF: 64mm 11 blades
  • Motor: Brushless Outrunner 2840-KV3150
  • ECS: 40A
  • Servos: 8x9g

Requires

  • 6-Channel radio transmitter
  • 6-Channel receiver
  • 4-Cell 14.8V 2200-2600mAh LiPo battery
  • 4-Cell compatible battery charger

  • Wingspan: 900mm (35.43in)
  • Length: 995mm (39.17in)
  • CG (Center of Gravity): 72-75mm from leading edge
  • Power System: 3150kV - 2840 size
  • Electronic Speed Control: 40A
  • Propeller / EDF: EDF 64mm 11 blade
  • Servos: 9 gram servo x 7, 9 gram 54 degree servo x 1
  • Landing Gear: Robust fixed
  • Required Battery: 4S 2200-3300mAh 35C XT60 Connector
  • Required Radio: 6 Channel transmitter and receiver required
  • Ailerons: Yes, separate servo for each
  • Elevator: Yes
  • Rudder: Yes
  • Flaps: Yes
  • Lights: No
  • Hinge Type: Fabric
  • Material: EPO Foam
  • Skill Level: Beginner to intermediate
  • Build Time: 10 minutes
  • Recommended Environment: Park, School, or AMA field