Traxxas 82046-4 TRX-4 Ford Bronco 1/10 4WD Sunset

Product Code: TRA-82046-4SUN
Barcode: 020334821010
$1,089.99
-
+

Stock levels are subject to continuous change and may vary from store to store. Store transfers and holds available on request by emailing support@metrohobbies.com.au

A Stunning Achievement in Scale Detail and Realism

Originally introduced in 1966 as a 4X4 compact SUV, the Ford Bronco matured as a full-size truck in the late 1970s, cementing its status as a rugged off-roader. Traxxas honors the classic 1979 Ford Bronco with this beautifully detailed and faithful reproduction mounted on the incredibly capable TRX-4® chassis. From the chrome wheels and bumpers to the gorgeous Sunset or red graphics, the TRX-4 recaptures the Bronco’s iconic era with the toughness and technology that could only come from Traxxas.

INNOVATION

Radically innovative technology combines with precision engineering to create a completely new breed of scale crawler…Only from Traxxas.

DETAILS

The TRX-4’s extreme off-road capability lies in the technology beneath its rugged exterior.

Features

Officially Licensed 1979 Ford Bronco Body

  • Scale details: grille, chrome bumpers, side mirrors, chrome side trim, and wipers

  • Clear front and side windows

  • Authentic decal sheet

  • Full Nylon composite wheel wells and floor pans

  • Additional scale accessories sold separately

Trail-tuned XL-5 HV Waterproof Electronic Speed Control

  • Fully waterproof design

  • Traxxas EZ-Set® one-button setup

  • Large, efficient heat sink

  • Wide voltage latitude 6–7 cell NiMH (7.2–8.4V) and 2–3s LiPo (7.4–11.1V)

  • Two stage low voltage protection (LVD)

Five drive profiles

  • Sport Mode — forward / brake / reverse

  • Race Mode — forward / brake / no reverse

  • Training Mode™ — 50% forward / 100% brake / 50% reverse (patented)

  • Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral

  • Crawl Mode — forward / instant reverse - no neutral with 100% hill holding brake

Motor

  • Powerful Titan™ 21T reverse rotation motor with internal cooling fan

  • Precision, preset gear mesh adjustments

  • Motor retention separate from gear mesh

Portal Axles

  • Increase ground clearance

  • Eliminate torque twist

  • Steel gears

  • Improve axle geometry and reduce strain on driveshafts

Rigid Steel Frame

  • 1.5mm thick steel frame rails increase torsional rigidity

  • Innovative design allows four wheelbase positions (300mm, 312mm, 324mm, 336mm)

  • Adjustable rear shock tower positions for SWB and LWB configurations

  • Bumpers adjust fore and aft

  • Rugged rock rails adjust for width

  • Wire routing clips integrated into frame rails

Drivetrain

  • Full-time shaft driven 4-wheel drive

  • Tough 6mm stub axles

  • Steel front CV driveshafts

  • Hardened steel rear axle shafts

  • Remote locking steel gear differentials with cable-actuation

  • Steel gear transfer case

Innovative Battery Compartment

  • Hinged battery strap allows quick and easy battery access

  • No pins to lose

  • Accommodates different height batteries

  • Accepts full-size long battery packs

  • Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)

  • Secondary front battery tray accepts smaller 1/16 scale batteries (with optional strap)

Transmission

  • Two speed high/low range with remote shifting

  • Dual horizontal shafts

  • Twin friction plate slipper clutch

  • Easily removed for servicing

Steering

  • Chassis mounted 2075X metal gear digital servo

  • Superior 45° steering angle

  • Direct steering (no servo saver)

  • Steering geometry corrected for bump steer

Suspension

  • Front — 3 link with panhard

  • Rear — Triangulated 4 link

  • Heavy-duty rod ends with steel hollow balls

  • 5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks

  • Oil-filled coilover GTS shocks exclusive to TRX-4 chassis

  • Silver-anodized aluminum bodies

  • Threaded bodies with collars easily adjust ride height

  • Silky smooth damping for the toughest trails

  • O-ring cap seal and dual X-ring shaft seals

Wheels and Tires

  • Replica chrome wheels with hub inserts

  • Pre-mounted 1.9” Canyon Trail tires with trail-tuned foam inserts

  • Trail tuned S1 rubber compound

  • 12mm steel hex

Transmitter

  • TQi™ 2.4GHz 4-channel transmitter

  • Traxxas Link enabled

  • Telemetry ready #6533 5-channel micro receiver with failsafe

  • Automatically stores and loads settings for up to 30 Traxxas Link enabled models

  • Exclusive Cruise Control feature for extended trail driving

  • Adjustable steering and throttle sensitivity (exponential)

  • Adjustable steering and throttle endpoints

  • High 13ms frame rate and near-zero latency for responsive control

Patented O-ring sealed watertight receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide coating

Includes

  • TRX-4, Ready-To-Race® model

  • XL-5 HV waterproof electronic speed control

  • Titan™ 21T reverse rotation motor

  • TQi™ 2.4GHz radio system with cruise control

  • High quality maintenance tools

Requires

Batteries

  • TRX-4 accepts a wide variety of NiMH (4–7 cell) and LiPo (2s–3s) batteries.

Charger

  • Traxxas EZ-Peak Live charger is recommended for easy and fast charging performance (model #2971).

AA Alkaline Batteries

  • Four AA alkaline batteries for the transmitter.

  • Length : 20.57 inches (523mm)
  • Front Track : 9.78 inches (249mm)
  • Rear Track : 9.78 inches (249mm)
  • Ground Clearance : 3.14 inches (80mm)
  • Weight : 6.42lb (2.91kg)
  • Height : 10.47 inches (266mm)
  • Wheelbase : 12.28 inches (312mm)
  • Approach Angle : 63.82°
  • Departure Angle : 43.22°
  • Breakover Angle : 59°
  • Front Shock Length : 3.54 inches (90mm)
  • Rear Shock Length : 3.54 inches (90mm)
  • Front Wheels : 1.9 x 1.02 inches (49 x 26mm)
  • Rear Wheels : 1.9 x 1.02 inches (49 x 26mm)
  • Front Tires : 4.64 x 1.89 inches (118 x 48mm)
  • Rear Tires : 4.64 x 1.89 inches (118 x 48mm)
  • Hex Size : 12mm
  • Speed Control : XL-5 HV
  • Motor (electric) : 21T Reverse Rotation
  • Transmission : 2-speed Hi-Lo, Remote Shifting
  • Gear Pitch : 32P
  • Differential Type : 4 Gear, Remote Locking
  • Chassis Structure / Material : Steel Ladder Frame with Nylon Composite Crossmembers
  • Brake Type : Electronic “Hill Hold”
  • Drive System : Shaft Driven 4WD
  • Steering : Chassis Mounted Servo
  • Servo : 2075X Metal Gear
  • Transmitter : TQi™ 2.4 GHz 4-Channel Transmitter
  • Receiver : 6533
  • Skill Level : 1
  • Battery Tray : 158.75 L x 47 W x 23/26mm H