Volantex RC 761-1 Mini Trainstar 400mm RC Airplane

Mini Trainstar is Ready To Fly (RTF) Complete Full 3 Channel (Elevator，Rudder, Throttle) Airplane; Fully Factory Assemble. The plane operates on 3 channels: one channel operates the elevator, a second channel operates the rudder and a third channel operates the throttle control with a variable speed control knob. Perfect training plane for junior players due to 6-axis gyro at Beginner Mode. Self-stabilization of gyro system help flying in windy days. 3-mode Digital proportional standardized radio control system: Beginner, Midd, Expert. 2.4Ghz spread spectrum technology: better anti-interference ability, faster reaction speed, least power consumption. 2.4Ghz technology allow more than 20 aircrafts to fly at the same time

Included in the kit transmitter cooperates with the receiver model in the 2.4 GHz band, so we are sure that the flight did not come to any disturbance. Mini Trainstar was entirely made of very hard, resistant to falls and impact of EPO foam. Low weight and robust design make the model behaves well during the flight and forgives mistakes novice modelers.

Features

• A perfect size pusher for beginners
• Quick, easy assembly, no glow required
• Light weight and durable EPO wing construction
• Self-stabilization of gyro system help flying in windy days
• Battery: New and improved Li-Po (3.7V 180mAH)
• Flight time: up to 20 minutes after 3 hours charge

Requires

comes with anything that is needed to fly it out of the box!

• Wingspan: 400mm (15.7 in)
• Overall Length: 310mm (12.2 in)
• Flying Weight(without battery): 20g
• Prop Size: 4x Spare Propeller
• Motor Size: Coreless 8mm
• Gyro 6-Axis Gyro
• Servo 2 x 1.3-grm
• Recommended Battery: 3.7V 180mAh Li-Po
• Charger: USB LiPo balancing charger
• Radio: 2.4Ghz 3-Channels
• Ailerons: No
• Flaps: No
• Minimum Age Recommendation: 14 years
• Experience Level: Beginer ~ Expert
• Recommended Environment: Outdoor
• Assembly Time: Less than half hour
• Is Assembly Required: Yes